ÖZELLİKLERİ:
- Satellite.xml split in Ka, Ku, C, S, L band
- Remote control behaviour reverted to pre-Jade
* (Some remotes suffered from very bad reception in the Jade RC)
- North America scan fix by Updatelee
- CDK Flashtool: support flashing between standard partition layout and 'MaxVar' partition layout!
* ('Var' partition is erased when the layout changes)
- Rotor improvement for the OpenEmbedded (OE) boxes
Enigma1:
- CVS Repository June 29th 2008
- PLi® Repository September 29th 2008
- CDK Flashtool: support flashing between standard partition layout and 'MaxVar' partition layout
* ('Var' partition is erased when the layout changes)
- Enigma Movieplayer fixed by ims
- Default sleeptimer now 30 minutes
- Insert and delete character support for DM500 remotes (Red and Green)
* Now Red (delete) en Green (insert) can be used.
* For all other boxes Vol+/Vol- and Red/Green can be used - it does not care...
- Remote control behaviour restored to pre-Jade
- Fixed 'DM7000 style' remote control for DM500
* (Added the ability to use the DM600, 7000, 7020 large remote on your DM500, DM56x0)
- Show serviceselector again with TV/RADIO ***, but only if the mode already was TV resp. RADIO.
* Toggling TV/RADIO doesn't bring up the service selector
- Timeshift delay input value limited to 999 instead of 60 seconds
- Timeshift / recording support for DM500+ (settings equal to DM600)
- Rotor improvement for the OpenEmbedded (OE) boxes
* (Smooth start and faster rotating at 18 V, motor stop detection improved)
Plugins:
- Bitrate plugin fixes for NTSC
PPanel:
- Channelsetting reload in PPanel fixed
EPG Features:
- Use audio *** for searchEPG in EPG channel
OSD Features:
- OSD transparancy setting in smaller steps for DM500+ and DM600 (5 instead of 25)
Web Interface Fixes:
- Some info in WebIf missing for IE fixed by ims
Network:
- Enable network and DHCP as default in case the Enigma config is not copied from /Var_init
* May fix some move /Var to network issues
- Do NOT add manually created mounts to the Enigma mount.conf
* It can cause double mounts if such a mount was already done in /Var/etc/init
Highlights DM500 MaxVar:
We've created 1Mb extra /Var space for you...
The removed items are now available via the PLi® downloads at the Software Management
We rebuilt the internal Flash tool completely!
So now you can flash back and forward between the standard PLi DM500 images and the PLi DM500-MaxVar images without using the ****** cable!!!
We advise you to use the 'root.cramfs' method for this!
See the url below on how to Flash your DM500 via the 'root.cramfs' method:
Further:
- Thanks to Updatelee for North America scan fix
Thanks to the PLi testers for several fixes and features
Support:
- Online update support (IPKG feed) for OpenEmbedded boxes
* (DM500Plus/DM600/DM7020)
- Global satellites.xml updated September 29th 2008
* (DVB-S: FEC = Automatic; DVB-S2: FEC = Normal; DVB-S2 can't handle auto-FEC)
- Satellites.xml split in Ka, Ku, C, S, L band
See our PLi® Wiki... Bu Linki Görmeniz İçin SupersatForuma Uye Olmanız Gerekmektedir.
So please report your feedback back at the forum...
Many low level changes fixes and other updates...
Detailed info, Wiki, FAQ's, HowTo's, TechNotes and information about this and the previous PLi® releases can be found on the PLi® Website:
Further, our Pli member Jonc created a Wikipedia Tool and PDA WYSIWYG Desktop Application for the PLi Dreambox images
If this DM500 version proves all OK, he will put the other Wikipedia Tools and PDA WebIf version online for the DM56x0, DM500+, DM600, DM7000, DM7020 and the limited E2 wiki.
ONKYO TX-NR 905
Sony KDL-46W3500 Bravia Engine 116cm LCD Tv
Sony KDL-32W4000 Bravia Engine 82cm LCD Tv
Sony BDP-S500/B Blu-ray Disk Oynatıcısı
Dreambox DM 7000S
DM 800 PVR
Bu Linki Görmeniz İçin SupersatForuma Uye Olmanız Gerekmektedir.
