Schneider
DTV 1
CTV

Service Mode
Simultaneous press Service-button on digi- bord & button C on RC.
Selection: Bass +/-. Adjust: Volume +/-.

Store: T. Exit: TV.
Schneider
DTV 100
CTV
Service Mode
Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & P+ on local keyboard.
Commands: arrows. Store: OK.
Exit: TV.
Schneider
DTV 2
CTV
Service Mode
Like DTV 1 or simultaneous press Service- button (down right on RC) & C button on RC. Selection:
Bass +/-. Adjust: Volume +/-. Store: IDEAL. Exit:
TV. Schneider DTV 3
CTV
Service Mode
Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard.
Selection: wheel. Adjust: ring. Store:
red button. Exit:
OFF. Schneider TV 4
CTV
Service Mode
Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard.
Selection: P +/-. Adjust: VOL +/-. Store: auto. Exit:
OFF. Schneider STV7128
TV 8

CTV
Service Mode
Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard.
Selection: P +/-. Adjust: VOL +/-. Store: auto. Exit:
OFF. Schneider TV 9
CTV
Service Mode
Simultaneous press red & blue buttons on RC then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard.
Selection: P +/-. Adjust: VOL +/-. Store: auto. Exit:
OFF. Schneider STV355FST CTV
Service Mode
MENU --> SERVICE --> OK --> 089

SEG
11AK18
CTV
Service Mode
MENU 1 6 7 5
SEG
11AK19
CTV
Service Mode
MENU 4 7 2 5

Seleco STEREO PLUS CTV
Service Mode
MUTE --> OK (M) --> TV Controls:
cursor buttons. Store:OK (M). Exit:TV

Sharp
4BSA CTV
Service Mode
Short conntacts 2 & 6 on bord TB connector and press button 'MODE' on RC. Remove short. Store:auto.
Exit:'MODE'. Sharp

63CS-03S CS
CTV
Service Mode
Press and hold buttons VOL- and PR+ on the local keyboard and then switch on with main switch.
Store:'POWER'. Sharp
D3000
CTV
Service Mode
Press Service-button on Digi-modul. Storen/off.
Exit:Service button. Sharp
Euro-DS1
CTV
Service Mode
Short conntacts 2 & 6 on Digi Modul Service Slot and then press button 'MODE' on RC. Storeromb-symbol) on RC.
Exit:standby, switch off, switch on, remove short. Sharp
54AT-15SC CTV
Service Mode
Press and hold buttons VOL- and PR+ on the local keyboard and then switch on with main switch.
Store:'POWER'. Sharp
DV-5401S CTV
Service Mode
Locate place for 2 buttons on local keyboard
(main board) S754-MODE and S755-PRESET. Enter:short S754 (-SERV-).
Commands:CH +/-. Store:short S755.