redline ts 3000 200 300 hdler çıkmış

**~~hakan_77~~** · 27-10-2012, 09:41

Redline Ts3000 Hd
[ts3000hd] £70.00

Click to enlarge

Redline Ts3000 HD
Redline Digital Satellite Systems launched its new innovation with faster 667Mhz processor. Redline Ts3000 HD have same functions as T7600 HD have. Additionally most popular Youtube and IPTV added in Redline Ts 3000 HD. Ts3000 satellite receiver combines HD and SD satellite reception, excellent high definition picture quality a MultiCrypt CAM. PVR recording to external drives and multimedia playback for an exceptional price.

Redline HD receiver have Media Centre which includes N32 Sites, Photo Sites, Google Maps, Weather Forecast, Bit Torrent, Mackolik, PC Link. Internet connection is require to enjoy all these amazing features.

Software and channels database transfer via usb or the disk shared in Lan.

Redline Ts3000 supports several movie file formats stored on external USB- connected drives like, AVI, VOB, MPG, DAT, FLV, DIVX, REAL VIDEO, MKV.

Music files supported formats are MP3, WMA, and ReaL Audio.

Ts3000 contains five highly enjoyable games, Boxman, Tetris, Hit Rate, Go Bang and Sudoku.

Comes with CA, EMU, Newcs, CCcam, Redcam.

‘’Satsharing’’ available in 3 modes Auto/SSSA/SSSP

WIFI usb dongle enabled

Wholesale Available Feel free to Email us.

Specification

1. Tuner & Demodulator

Input Frequency Range 950MHz ~2150 MHz

RF input Signal Level -64 dBm~ -25 dBm

RF impedance 75W

RF Bandwith 55 MHz/8 MHz (Under 5 Msps)

LNB Power 13/18 DC, +/-5%, O.5A max

LNB Tone Switch 22 KHz +/- 2KHz, O.64V p-p +/O.15V

DisEqC Control V1.0, V1.2, Tone burst A/B

Demodulation QPSK

Symbol Rate 1~45 Msps/SCPC, MCPC

2. MPEG

Transport Stream MPEG-4, H.264, MPEG-2 ISO/IEC

13818 Transport Stream Speciﬁcations

Input Rate Max. 120 Mbit/s

Video MPEG-2 MP@ML

Audio MPEG-1/2 Audio Layer1 or Layer2, MPEG2 MPEG4 and

MPEG4 AAC-HE (AAC+), Dolby Digital (AC-3), MP3, WMA

Aspect Ratio 4:3, 16:9, Auto

Video Resolution 576i, 576p, 720p, 1080i

Audio Mode Stereo, Dual Channel, Joint Stereo, Mono

Audio Sampling Frequency 32,44.1/48KHz

3. Connector

LNB IF input F type, IEC 169-24 Female

LNB IF Loop-through F type, IEC 169-24 Female

HDMI HD Video/Audio, Ver 1.2, Type A

TV SCART RGB, Audio L/R

RCA AUDIO L/R, 0/12v

Ethernet Port Lan 10/100

CA Slot 1x

4. Power Supply

Input Voltage 100-240V~, 50/60Hz

Power Consumption Max 25w

Standby Power Max 1w

Weight Appr. 1.5 KG

Operating Temperature 0°-40°

Storage Temperature -40° - 60°

5. Main System

CPU 667 MHz

Flash (NAND FLASH) 8 MByte (64 Mbit)

S-Dram (DDR I) 16 MByte (128 Mbit)

USB USB 2.0

Software Upgrade By USB, IRD, STB via Computer

What Inside Box
1x Remote Control Unit (RCU)

1x User Manual

2x AAA Batteries

1x Digital Satellite Receiver

1x HDMI Cable

**manic** · 03-11-2012, 04:12

Make a .Text file on your Desktop.

Follow C line format and save it.

Attach Usb into stb and from Menu /settings/upgrade/super settings

Select blue button to Enable Cccam and press OK. In cccam page press green button
To select file browser. Here usb appears enter in it.

and select the file you made on your computer. Stb automatically take this file.

Go to connect and press OK.

If everything goes right you should see the screen below .
GOOD LUCK
This receiver can take upto 3 Cccam lines and 25 ‘’N’’ lines at a time. .text file format looks below.
{c,port,dyndns.com,username,pass}
{c,port,dyndns.com,username,pass}
{c,port,dyndns.com,username,pass}
Copy and paste this format into text file and follow the same procedure mentioned above in this guide.
{n,port,dyndns.com,username,pass,01 02 03 04 05 06 07 08 09 10 11 12 13 14}
{n,port,dyndns.com,username,pass,01 02 03 04 05 06 07 08 09 10 11 12 13 14}
{n,port,dyndns.com,username,pass,01 02 03 04 05 06 07 08 09 10 11 12 13 14}
{n,port,dyndns.com,username,pass,01 02 03 04 05 06 07 08 09 10 11 12 13 14}
{n,port,dyndns.com,username,pass,01 02 03 04 05 06 07 08 09 10 11 12 13 14}