Tüm TV'lerin Servis Giriş Kodları

[SAFRAN]

Tüm TV'lerin Servis Giriş Kodları

Phılıps servis kodları....

Hotel menüsünü deaktiv veya aktiv etmek icin.

Chasis GR -1AX

-Program 38 i acin,4 saniye icinde TVden "Store" "Program+" tuslarina beraber basin.

-Program 38 i acin,4 saniye icinde TVden "Store" "Control+" tuslarina beraber basin.


-Program 38 i acin,4 saniye icinde TVden "Store" Kumandandan "Sleeptimer" tuslarina beraber basin.

Not:"Store tusu olmayan TV lerde "Install" tusu vardir,Store yerine install secin.



Chassis L7,L7.2 Servis menüsü

(TV nin icinde Prozessorun yanindaki platinde) iki teli (pozisyon numaralari 0028 ve 0029) bunlari TV acik halde iken kisa devre yapin.


Chassis D16 III Servis menüsü

ana plakette önde IC7665 entegresinin yaninda M30 ve M31 iki teli 1 saniye kadar kisa devre yapin.




Chassis EM2E Servis menüsü

Kod: 062596 "Menu" tusuna basin.
Servis menü kod:062596i+
Yukardakilerden haric diger kodlar:0162596,0362596,0462596,0462596,0862596

[SAFRAN]

PREMİER TV.......

PREMIER PR-7430T TELEVİZYON SERVİS MENÜSÜ GİRİŞİ

1-SİYAH BEYAZ GÖSTEREBİLİR
2-OTOMATİK ARAMADA DURABİLİR
3-RESİM ÇAKIŞMASI (SENKRON YAPABİLİR)

BU ARIZALARI GÖRDÜĞÜNÜZ ZAMAN CİHAZI RESETLEYİN

RESETLEME
TV KAPALI İKEN V+ V- TUŞUNA BASARAK TV AÇ SERVİS MENÜSÜNE GİRİŞ GERÇEKLENİR

SERVİS MENÜSÜNE GİRİP KIRMIZI VE YEŞİL RAKAMLARINDA İKEN
TV ÜZERİNDEN PM İLE AV TUŞLARINA AYNI ANDA BAS TV KAPANIP 15sn SONRA
SKYWORTH YAZARAK AÇILIR
TEKRAR SERVİS MENÜSÜNE GİRİP V AMP - H AMP İLE VERTİKAL VE EAST-WEST AYARI YAPILIR
TEKRAR MENÜ TUŞUNA BASILARAK KIRMIZI VE YEŞİL RAKAMLAR BULUNUR
123456789 KIRMIZI
1377544671 YEŞİL
BU RAKAMLAR AÇILDIĞINDA YEŞİL RAKAMDAN SAĞDAN ÜÇÜNCÜ 3 OLUR
3 RAKAMINI 6 OLARAK DÜZELTİLİR
MENU TUŞUNA BASILARAK 456789 RAKAMLARI GÖRÜLÜR BU RAKAMLARDAN
7 SEÇİLİR SONRA LOGO YAZISI GÖRÜLÜR EKRANDA SİYAH KURSÖR GÖRÜNÜR
İLK ÖNCE P+ SONRA V+ TUŞLARINA 7 ŞER KERE BASILIP BAŞA GELİNİR SONRA
PREMIER YAZILIR YAZDIKTAN SONRA PM TUŞU İLE YAZININ RENGİ AYARLANIR
UK ÜZERİNDEN SM TUŞU İLE HAFIZAYA ALINIR TV KAPATILIP AÇILIR

Pr 3788 Servİs Menüsü girişi

Tv Nİn V- TuŞuyla Kumandanin Rewiew TuŞuna Ayni Anda Basin
Factory Yazisi Ekrana Gelİcek Ayni İŞlemİ Bİrdaha Yapin
Adjust Yazisi Gelİcek Pr+ Pr- TuŞlariyla SeÇİn V+ V- TuŞlariyla
Ayarlayin

Lc863320-24 İŞlemcİlİ ( Pr5499-5640-5670-3890-3780 )

Servİs Menu GİrİŞİ

2kere Menu TuŞuna Basiniz
Q Wiew TuŞuna Basiniz
Mute TuŞuna Basiniz
Saat TuŞu İle Ayar MenusÜnÜ SeÇİn
Prog+ İle SeÇİn V+ İle Ayarlayin
---
SKYWORTH İŞLEMCİLİ TV SERVİS MENUSU GİRİŞİ PR8770

Vulume + ile - aynı anda basılı tutup power anahtarı açılır ayar tablolarına ulaştıktan sonra
P+ , P- ayar satırı seçilip V+ V- ilede ayarlama işlemi yapılır Menü tuşu ile istenilen tablolara giriş yapılır.

5588 T servis menüsü

skip tuşuna bas
selection - tuşuna bas
* normal tuşuna bas
P+ ile ayar seç.
V+ ile ayarla

[SAFRAN]

GRUNDIG TV......
Menu ayarlarinda servis sifresi isteyen bosluga "8500" rakamini verin

Sifresiz Chassislerde:

Tamirden dolayi 24Cxxxx eeprom degistikten sonra,TV de ekranda anahtar resmi cikacaktir,bir defaya mahsus sifre isteyecektir. Bu durumda TV nin önünden ses+ , ses- , program- , program+ tuslayiniz,bu sifreyi emniyet kilidini unutmaniz halindede kullanabilirsiniz

Hotel modu icin:

TV anahtardan kapali halde kumandadan "i" tusuna basili tutun ve TV yi acin (bazi modellerde P/C tusunda oluyor),Hotel ON veya OF olarak secim yapabilirsiniz.ON komutuna getirirseniz program arama fonksiyonunu kapatmış olursunuz ve belli bir ses siniri koyabilirsiniz,cocuklarin program ayarlarını kurcalamamaları icin ideal bir cözüm.

Tamirden dolayi 24Cxxxx eeprom değistiginde OSD menusu ortada olmaz ,bunu düzeltmek icin OSD yazan yerden OSD menu görüntü posisyonunu vertikal/horizantal olarak ayarlayabilirsiniz.

Grundig davio cocuk kilidi:...7038 yaz ok

[SAFRAN]

ARÇELİK 70 EKRAN STEREO ÇİFT SKARTLI YENİ PROMOSYON TV’LER

SERVİS KODUNA GİRİŞ 909 ELCİK İLE CONTRAST – BİR DEFA TUŞLAYIN SONRA KENDİ KUMANDASI İLE PROĞRAM + VE – İLE AŞAĞI YUKARI HAREKET EDER DEĞERLERİ DEĞİŞTİRMEK İÇİN SES + VE – TUŞLARINI KULLANIN



Tun………………:.Panasonic

EWPP…………...:09

PAL……………..:NO

TEST……………:24

CRT…………….:4:3

SUBWOOFWER.:NO

HOTEL…………:OFF

UBOW…………:32

HPAR………….:32

IFDF……………:32

PWLT…………..:11

TEXT TABLE….:WEST

TOPTEXT………:NO

STYP NICAM…..:OFF

SSTD BG……….:ONLY

VZOM…………..:34

RGB……………..:01

AV………………:05

USLP……………:30

USHT……………:29

SCOR……………:25

WAMP…………..:45

EWW……………:58

HSHT……………:40

EWPW…………..:15

EWCL……………:32

EWCU……………:32

EWT………………:30

BRI………………..:29

CDR……………….:05

CON……………….:59

HUE……………….:32

SAT……………….:32

YOLY…………….:04

BLOR……………..:44

BLOG……………..:40

BLUE……………..:36

RED……………….:23

GRW………………:32

SCRN……………..:OFF

HEAD……………..:YES

PEAK………………:11

EEP…………………:00

STD.STB-BY...…….:OW

AGC………….…….:24

Arçelik Beko 14.2 Servis Mod
MENU TUŞANA BAS 9301 YAZ SERVİS MODA GİRER

[SAFRAN]

Vestel 11AK19

servis menuye girmek önce installation menuye girip 4, 7, 2, 5 uk üzerinden sırası ile basın
ADJUST ayarları için yukarı/ aşagı tuşlarını kullanarak Adjust secenegine gelin ve sağ / sol tuşlarıyla girin.Farklı adjust parametrelerini seçmek için yukarı / aşagı tuşlarını kullanın ve seçilen parametreleri degiştirmek için de sag / sol tuşlarını kullanın.

Adjust 00 RED (35)
Adjust 01 GREEN (35)
Adjust 02 BLUE (35) beyaz denge ayarlarıdır.

Adjust 03 AGC ayarıdır.

Adjust 04, 05 (IF PLL ayarıdır ve kesinlikle ellenmemelidir.pattern jeneratoru ile sinyel verilerek ayarlana bilir.)

Adjust 06, 07, 08, 09 Y-Delay Pal-Secam ayarlarıdır.(kesinlikle değiştirmeyin)

Adjust 10 Vertikal Zoom
Adjust 11 Vertikal Scroll ( Düşey)
Adjust 12 4:3 Horizantal Shift
Adjust 13 4:3 Vertikal Slope Düşey eğim ayarı
Adjust 14 4:3 Vertikal Amplitude Düşey genlik ayarı
Adjust 15 4:3 S-Correction S-düzeltme ayarı
Adjust 16 4:3 Vertikal Shift düşey kaydırma ayarı
Adjust 17 4:3 EW (EW Genlik) ayarı
Adjust 18 4:3 EW Parabola (EW Parabola genişlik) ayarı
Adjust 19 4:3 EW Corner Parabola (EW Köşe Parabol) ayarı

Bu ayarlara girdiğiniz taktirde en çok dikkat etmeniz gereken hususu unutmayın pattern olmadan bazı ayarları tam yapamazsınız
*Bu ayarları yaparken doga bilecek hatalar kullanıcıya aittir*


VESTEL SERVİS KODLARI CT-V20MT-E14-S MODELİ



SERVİS MENÜSÜNE GİRMEK İÇİN KUMANDADAN MENÜ 4725 TUŞLAYIN PROĞRAM + VE – İLE AŞAĞI YUKARI DEĞERLERİ DEĞİŞTİRMEK İÇİN SES + VE – TUŞLARINI KULLANIN





OSD………………:070

IF1………………..:006

IF2………………..:062

IF3………………..:004

IF4………………..:065

AGC……………...:050

VLIN……………..:045

RGBH…………….:007

VSOF……………..:-16

VPOF……………..:+12

HSOF……………..:-24

HPOF……………..:-04

HTOF……………..:-24

WR………………..:040

WG………………..:040

WB………………...:040

BR…………………:031

BG…………………:031

APR………………..:010

FMP1………………:009

NIP1……………….:020

SCP1………………:008

SEC1………………:008

FMP2………………:013

NIP2……………….:016

SCP2………………:008

SEC2………………:017

F1H………………..:00001001

F1L………………..:10010010

F2H………………..:00011011

F2L………………...:10000010

BS1………………...:00000011

BS2………………...:00000110

BS3………………...:10000101

CB………………….:10001110

OP1…………………:10101001

OP2…………………:00001001

OP3…………………:00100101

OP4………………….:01111111

OP5………………….:11100001

TX1………………….:01010010

GEOM……………….:00000000

OP8………………….:00000000

Vestel 72 100 hrz flat servis menü şifresi: menüye bas 1675

Vestel diğer seriler :Menü 4725

[SAFRAN]

JVS 37 EKRAN RTV
TV NİN SOL ALT KÖŞESİNDE KİLİT LOGOSU ÇIKIYORSA

UZAKTAN KUMANDANIN (U.K) PİC TUŞUNA 3 SANİYE SÜRE İLE BASIKTUT
TV Yİ ON OFF ANAHTARINDAN AÇ KİLİT AÇILMIŞ OLUR!


SHARP 51ET-35S :tv üzerinden v - ve p+ tuşlarına basarak aç
sol üst köşede SVS yazısı çıkacak
UK üzerinden soru işaretli ( ? ) txt tuşuna bas
AGC yazısı çıkacak
tv üzerinden veya UK üzerinden P+ P- tuşları ile yapmak istediğin ayarı bul
V+ V- tuşları ile ayarı yap.


PROFİLO ULTRALİNE.... tv normal çalışıyorken tv üzerinden V- aynızamanda uk üzerindende txt saat tuşuna basarsan serviv menüsü ekrana çıkar


ARÇELİK 12.7 21 BG TXFR ..........

SERVIS MODUNA GİRİŞ İÇİN 909 ELCIKTEN CONTRAS - TUŞUNA BASIN

AGC.................:33
2.AGC..............:38
ST.BY..............:YES
AV2.................:YES
CLR.S..............:PAL/NTSC 3.5
SND.S.............:BG
QSS/1.............:INTERCARRIER
TEXT...............:FASTEX
LANG...............:A
HOTEL.............:NORMAL TV
RGB IN.............:ON
APR................:ON
B.STR.............:OFF


Show tv stv 2029 servis menüsü

Uk'nın içi açılacak renkli tuşlardan kırmızı olan tuşun altındaki boş tuşu aktif hale getirin...
aktif hale gelen tuş ile servis menüsüne girilir.....
SERVİS MENÜSÜ DESİNG AYARLARI

agc gain................01
option 1................16
option 2................32
option 3................33
option 4................15
option 5................00
st text..................00
hpos osd..............017
vpos osd..............04
hpos txt...............057
vpo txt................16
v linearıty.............32

[SAFRAN]

AKAI
CT-2119
CTV
Test Mode
Simultaneous press + & - on local panel and then power on with main switch.
Exit: POWER.

Allstar
3750
CTV
Hotel Mode
OFF:
Select programm 38. Simultaneous press
(3 sec) STORE & CONTROL+ on local keyboard. ON:
Select programm 38. Simultaneous press
(3 sec) STORE & PROGRAM- on local keyboard.

AudioTon
CTV 5502
10.3 90° MONO CTV
Child Lock
Clear
Press UP & DOWN buttons together on tv's
local control and then switch on. You will see
SERVICE MODE. Do not press any button, just power off the set, then on. AudioTon
CTV 5502
10.3 90° MONO CTV
Service Mode
Press UP & DOWN buttons together on tv's local control and then switch on.

Beko
CTV
Service Mode Simultaneous press P+ & P- on local panel and then power on with main switch.

Blaupunkt MM63-13VT FM240.00
CTV ATS
Press button P/C on RC and switch on TV with main switch.
Blaupunkt MM63-13VT FM240.00
CTV
Hotel Mode
Cancel
Press button 'i' on RC and switch on TV with main switch.

Brandt
ICC9
CTV

Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.

Continental
CT1412B CTV
Service Mode
Press and hold P+ and P- on local panel, then switch on TV with main switch.

Ferguson
ICC9
CTV
Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED
switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.) Ferguson
TX92
CTV
Hotel Mode
Cancel
Put TV into standby, then turn power off, then turn power on whilst holding standby button on remote and step through menus to vol set and increase level to max.

[SAFRAN]

Finlux
17/21B60
63/71Y2
STEREO PLUS CTV
Service Mode
MUTE --> OK (M) --> TV Controls:
cursor buttons. Store:
OK (M). Exit: TV

GoldStar MC-51B CTV
Service Mode
Simultaneously press MENU, VOL-, PR- on the local panel.

Graetz BURGGRAF STEREO 4876
Digivision DIGI III 110° CTV
Service Mode
Turn on 'TV Internal Service Program' switch on the digital modul (SE on display). On RC: 1=U1
V SHIFT, 2=U2 V LIN DN, 3=U3 V LIN, 4=H1

H SHIFT, 5=H2 H AMP, 6=H3 EW AMP, 7= C, 8=C1, 9=C2, 0=H4 EW TRAPEZ... TV=MEMO, VOL+/-=ADJUST.

Grundig
CUC1800
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1800
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1800
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1805
CTV
ATS Reset
Press and hold button VOL+ on the TV and switch the mains button ON. ATS bit is set. Grundig
CUC1805
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1805
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC1805
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1805
CTV
Service Mode
Press 'i'. Dialog Center --> Service --> 'for authorized dealer' --> Code Number 8500. Grundig
CUC1805

CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC1806
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC1806
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1806
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1806
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1806
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1821
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1821
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1821
CTV
Service Mode

Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1822
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1822
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1822
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1824
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1824
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1824
CTV
Service Mode
Menu guide: 'i', 'Special functions', 'Service',
'Code 8500'. Grundig CUC1825
CTV
ATS Reset
Press and hold button VOL+ on the TV and switch the mains button ON. ATS bit is set. Grundig
CUC1825
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1825
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.

[SAFRAN]

19798-300.01) indicates the EPROM version. Grundig
CUC1825
CTV
ROM Data
Loading
Press and hold the P- buton on the TV and switch on with the mains button. Loading the Average Values / Emergency Data Set
(ROM Dana). This is only possible once on replacement of the NVM or uP.
Grundig
CUC1825
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1825
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC1826
CTV
ATS Reset
Press and hold button VOL+ on the TV and switch the mains button ON. ATS bit is set. Grundig
CUC1826
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1826
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1826
CTV
ROM Data
Loading
Press and hold the P- buton on the TV and switch on with the mains button. Loading the Average Values / Emergency Data Set
(ROM Dana). This is only possible once on replacement of the NVM or uP.
Grundig
CUC1826
CTV
Service Mode
Press 'i'. Dialog Center --> Service --> 'for authorized dealer' --> Code Number 8500. Grundig
CUC1826

CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC1827
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1827
CTV Default Values Entering
Depress and hold the button 'P-' on the RC while switching on with the mains button. (This is only possible once on replacement of the NVM
or uP). Grundig CUC1827
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1827
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1827
CTV Volume Offset Cancel
Press and hold the 'AUX' button on the RC while switching the TV on with the mains button. Grundig
CUC1828
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC1828
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1828
CTV

EPROM Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1828
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1828
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1829
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC1829
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1829
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1829
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1829
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1830
CTV
Child Lock
Cancel

[SAFRAN]

General reset with number 7038. Grundig
CUC1830
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1830
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1830
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1830
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1836
CTV
Child Lock
Cancel
General reset with number 7038. Grundig
CUC1836
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1836
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1836
CTV Factory Default

Values
Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1836
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1842
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1842
CTV
Demo Mode
Demo on: Depress and hold button 'L+' on the TV and switch the TV on with the mains button. Press the 'P+' button within a time of 10s. Demo off: ATS Reset (by depressing the 'L+' button on the TV while switching on with the mains button).
Grundig
CUC1842
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version. Grundig
CUC1842
CTV Factory Default Values Resetting
Buttons 'AUX', 'OK'. Grundig
CUC1842
CTV
Service Mode
Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig
CUC1851
CTV
Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK. Grundig
CUC1851
CTV EPROM
Version Nr.
Press button 'i' to call up the 'Dialog Center' --> OK. The version number is shown by pressing
the 'AUX' button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version.